Fixed some print statements

scripts/.gitignore

@@ -1,2 +1,3 @@
 *.wav
 __pycache__/
+junk/

scripts/README.md

@@ -0,0 +1,53 @@
+# Planned algorithm
+
+From selcald:
+One possible solution to this problem is to step back from trying to determine the frequencies of the individual tones and to instead verify that:
+
+- There are two tones present
+- The difference in frequency between the two tones matches a pair of known tones in the alphabet
+
+The author of selcald seems awfully hung up on trying to ensure correct detection of the silent period
+between two tones. I don't think this is worth actively trying to detect, as it is more important
+to find two dominant tones for a period of ~1 sec, followed by another 1 sec with two dominant tones.
+The silence period is irrelevant - according to the spec of 0.2 +/- 0.1 sec _at the transmitter_ it
+could be impossibly short to reliably distinguish between successive `A*-A*` tones at the receiver.
+
+## Terrible pseudocode
+```
+collect samples from audio source <wavfile, arecord>
+low pass & decimate if necessary
+<simultaneously>
+    run wide fft over a large sample window
+    detect peak bin (with some hysteresis)
+    if peak bin within tone band:
+        assume difference is due to doppler shift
+        gradually adjust expected freq(s) for tone(s) to match
+    record RMS energy into buffer
+
+<simultaneously>
+    run correlation over small sample window
+    For each tone in the alphabet:
+        Cross correlate the audio with the adjusted tone
+        Record normalized tone energy into tone buffer
+
+    For tone record in tone buffer:
+        sort tones by amplitude
+        if:
+            - the two highest amplitude tones are within 3 dB of each other
+            - the two highest amplitude tones are at least 3 dB greater than the next nearest tone
+            - the sum of the two highest tones account for at least 60% of the modulation energy (-2.22 dB)
+                (as determined relative to stable RMS energy calc'd by wide fft)
+                (nominally 90% / -0.458 dB)
+        then:
+            record dominant two tones in tone buffer
+
+        if any two tones are dominant tones for the majority of previous 1 sec:
+            record dominant two tones in code buffer
+            reset tone detection counter (prohibit detecting codes for another 0.5 sec)
+
+    upon code record in code buffer:
+        if dominant code previously occured within 1.25 sec
+            emit SELCAL detection
+            reset code detection counter (prohibit detecting codes for another 0.5 sec)
+
+```

scripts/audio-capture.sh

@@ -0,0 +1,8 @@
+#! /bin/sh
+
+set -eux
+
+sample_rate="44100"
+channels="2"
+
+arecord -t raw -c ${channels} -f S16_LE -r ${sample_rate}

scripts/audio-pipe.sh

@@ -0,0 +1,9 @@
+#! /bin/sh
+
+set -eux
+
+audio_file=$1
+sample_rate="44100"
+channels="2"
+
+ffmpeg -i ${audio_file} -f s16le -ac ${channels} -ar ${sample_rate} -

scripts/filters.py

@@ -1,20 +1,35 @@
 
+import numpy as np
 from scipy.signal import butter, lfilter, decimate
 
 def anti_alias(data, sample_rate, max_frequency):
+    FILTER_HEADROOM = 1.2
     nyquist_rate = 2 * max_frequency
+    downsample_factor = 1
 
     if sample_rate > nyquist_rate:
-        filtered_data = lowpass_filter(data, max_frequency, sample_rate)
+        filtered_data = lowpass_filter(data, max_frequency * FILTER_HEADROOM, sample_rate)
 
         downsample_factor = int(sample_rate / nyquist_rate)
-
         filtered_data = decimate(filtered_data, downsample_factor)
         sample_rate = sample_rate // downsample_factor
     else:
         filtered_data = data
 
-    return filtered_data, sample_rate
+    return filtered_data, sample_rate, downsample_factor
+
+def smoothing_filter(data, window_size=256):
+    window = np.ones(window_size) / window_size
+    return np.convolve(data, window, mode='same')
+
+# Stolen from selcald
+def note(freq, length, amp=1.0, rate=44100):
+    if freq == 0:
+        data = np.zeros(int(length * rate))
+    else:
+        t = np.linspace(0, length, int(length * rate))
+        data = np.sin(2 * np.pi * freq * t) * amp
+    return data
 
 # These originally came from https://scipy.github.io/old-wiki/pages/Cookbook/ButterworthBandpass,
 # but they've been copied around the internet so many times that ChatGPT now produces them verbatim.

scripts/live.py

@@ -0,0 +1,93 @@
+#! /usr/bin/env python3
+
+import sys
+import threading
+import numpy as np
+import signal
+import pyqtgraph as pg
+
+data1 = np.random.normal(size=300)
+ptr1 = 0
+
+win = pg.GraphicsLayoutWidget(show=True)
+win.setWindowTitle('pyqtgraph example: Scrolling Plots')
+
+plot = win.addPlot()
+curve = plot.plot(data1)
+
+
+
+keep_running = True
+def signal_handler(sig, frame):
+    global keep_running
+    print('SIGINT received. Stopping...')
+    keep_running = False
+
+def read_audio_from_stdin(chunk_size, process_chunk):
+    global keep_running
+
+    while keep_running:
+        # 2 bytes per sample for int16
+        read_size = chunk_size * 2
+        data = sys.stdin.buffer.read(read_size)
+
+        # Break the loop if no more data is available
+        if not data:
+            break
+
+        # Convert the binary data to a numpy array of int16
+        audio_chunk = np.frombuffer(data, dtype=np.int16)
+        process_chunk(audio_chunk)
+
+def process_audio_chunk(audio_chunk):
+    # Example processing: simply print the chunk
+    global data1, ptr1, curve
+    print(f"Read chunk: {len(audio_chunk)}")
+
+    data1[:-1] = data1[1:]  # shift data in the array one sample left
+                           # (see also: np.roll)
+    data1[-1] = len(audio_chunk)
+
+    ptr1 += 1
+    curve.setData(data1)
+    curve.setPos(ptr1, 0)
+
+
+if __name__ == '__main__':
+    signal.signal(signal.SIGINT, signal_handler)
+
+    chunk_duration = 0.1 # seconds
+    sample_rate = 44100
+    channels = 2
+    chunk_size = int(sample_rate * chunk_duration) * channels
+
+    reader_thread = threading.Thread(target=read_audio_from_stdin, args=(chunk_size, process_audio_chunk))
+    reader_thread.daemon = True
+    reader_thread.start()
+
+    pg.exec()
+
+    # Wait...
+    reader_thread.join()
+
+
+'''
+# 1) Simplest approach -- update data in the array such that plot appears to scroll
+#    In these examples, the array size is fixed.
+p1 = win.addPlot()
+p2 = win.addPlot()
+data1 = np.random.normal(size=300)
+curve1 = p1.plot(data1)
+curve2 = p2.plot(data1)
+ptr1 = 0
+def update1():
+    global data1, ptr1
+    data1[:-1] = data1[1:]  # shift data in the array one sample left
+                            # (see also: np.roll)
+    data1[-1] = np.random.normal()
+    curve1.setData(data1)
+
+    ptr1 += 1
+    curve2.setData(data1)
+    curve2.setPos(ptr1, 0)
+'''

scripts/selcal-detect.py

@@ -5,85 +5,30 @@ import sys
 import numpy as np
 from scipy import signal
 from scipy.io import wavfile
-from scipy.signal import butter, lfilter
-
-
-tones = {}
-with open('tones.csv', newline='') as csvfile:
-    reader = csv.DictReader(csvfile)
-    for row in reader:
-        tones[row['designator']] = float(row['frequency'])
-
-'''
-def freq_of_key(midi_key):
-    return 440.0 * (2 ** ((midi_key - 69)/12))
-
-tones = {}
-for c in range(65, 90):
-    tones[c] = freq_of_key(c)
-'''
-
-# Shamelessly lifted from
-# https://scipy.github.io/old-wiki/pages/Cookbook/ButterworthBandpass
-def butter_bandpass(lowcut, highcut, fs, order=5):
-    nyq = 0.5 * fs
-    low = lowcut / nyq
-    high = highcut / nyq
-    b, a = butter(order, [low, high], btype='band')
-    return b, a
-
-def butter_bandpass_filter(data, lowcut, highcut, fs, order=5):
-    b, a = butter_bandpass(lowcut, highcut, fs, order=order)
-    y = lfilter(b, a, data)
-    return y
-
-# tone synthesis
-def note(freq, cycles, amp=32767.0, rate=44100):
-    len = cycles * (1.0/rate)
-    t = np.linspace(0, len, int(len * rate))
-    if freq == 0:
-        data = np.zeros(int(len * rate))
-    else:
-        data = np.sin(2 * np.pi * freq * t) * amp
-    return data.astype(int)
-
-def decimate_from_sample_rate(sample_rate):
-    if sample_rate == 44100:
-        return 4  # rate = 11025, Fmax = 5512.5 Hz
-    elif sample_rate == 48000:
-        return 5  # rate = 9600, Fmax = 4800 Hz
-    elif sample_rate == 22050:
-        return 2  # rate = 11025, Fmax = 5512.5 Hz
-    elif sample_rate == 11025:
-        return 1  # rate = 11025, Fmax = 5512.5 Hz
-    else:
-        raise ValueError("Sample rate not supported")
+from tones import TONES
+from filters import bandpass_filter, note, smoothing_filter, anti_alias
 
+pure_sample_length = 0.1
 
 if __name__ == '__main__':
-    # TODO JMT: What is this?
-    FLT_LEN = 2000
-
     file_name = sys.argv[1]
     sample_rate, data = wavfile.read(file_name)
-
     print(f"{file_name}: {len(data)} samples @ {sample_rate} Hz")
 
-    decimate = decimate_from_sample_rate(sample_rate)
-    if decimate > 1:
-        data = signal.decimate(data, decimate)
-        sample_rate = sample_rate / decimate
+    if len(data.shape) == 2:
+        data = data.mean(axis=1)
 
-    print(f'Length after decimation: {len(data)} samples')
+    # Coarse normalisation
+    data = data / np.max(data)
 
-    data = butter_bandpass_filter(data, 270, 1700, sample_rate, order=8)
+    # TODO JMT: Find out why the correlation step fails when max frequency <= 2 * nyquist rate
+    data, sample_rate, decimation = anti_alias(data, sample_rate, 4800)
+    print(f'Length after decimation: {len(data)} samples (/{decimation}, {sample_rate} Hz)')
 
-    pure_signals = {tone:note(freq, FLT_LEN, rate=sample_rate) for tone,freq in tones.items()}
+    pure_signals = {tone:note(freq, pure_sample_length, rate=sample_rate) for tone,freq in TONES.items()}
     correlations = {tone:np.abs(signal.correlate(data, pure, mode='same')) for tone,pure in pure_signals.items()}
+    massaged = {tone:smoothing_filter(correlation) for tone,correlation in correlations.items()}
 
-    N = FLT_LEN // 8 # Rolling average length
-    cumsum_convolution = np.ones(N)/N
-    massaged = {tone:np.convolve(correlation, cumsum_convolution, mode='valid') for tone,correlation in correlations.items()}
 
     # Only import if we're actually plotting, these imports are pretty heavy.
     import pyqtgraph as pg
@@ -100,7 +45,7 @@ if __name__ == '__main__':
     legend.setParentItem(legend_view)
 
     color_map = pg.colormap.get('CET-C6s')
-    colors = color_map.getLookupTable(nPts=len(tones))
+    colors = color_map.getLookupTable(nPts=len(TONES))
 
     for (tone, correlation), color in zip(massaged.items(), colors):
         line = plot.plot(correlation, pen=pg.mkPen(color=color), fillLevel=0.1, name=tone)